Spulen & Zubehör

A 4.5 m cable for magnetic resonance imaging providing the audio connection for microphones. Siemens part number 10092323, a new OEM original unit.

HELICOFLEX sealing element with 188.5 mm outer diameter for MR magnet applications, manufactured by Siemens (part number 10614120). Supplied as a n...

A spare component for computed tomography equipment, manufactured by Siemens and issued under part number 11106814. Supplied as a new OEM original ...

Filtered PRV adapter for magnetic resonance imaging systems, 4k variant. Supplied as a new OEM original unit from Siemens, part number 10129376.

Pre-amplifier for microphones listed for magnetic resonance (MR) use; amplifies low‑level microphone signals prior to digitization. Manufacturer Si...

An air filter sponge set serving as intake filtration for computed tomography equipment. Supplied new as an OEM original unit by Siemens (part numb...

3.5 m microphone cable for magnetic resonance imaging. A new OEM original unit from Siemens; part number 10092322.

3/8 CPC water couplings for MRI systems, intended to connect water lines. Siemens part number 10743930 is a new OEM original unit supplied in seale...

RF-shielding enclosure for magnetic resonance imaging, serving to contain and isolate radiofrequency fields. A new OEM unit by Siemens (part number...

Level sensor for MRI transmit antenna manufactured by Siemens, part number 07391886. A new OEM original unit, supplied sealed in its packaging.

Sealing element with 188.5 mm outer diameter for MR magnet applications, classified as a magnet part. A new OEM original unit, Siemens part number ...

Patient positioning strap with side-release buckle for immobilizing or stabilizing patients during imaging procedures; part number 5513655. Offered...

Strap with a side-release buckle for securing and adjusting patient position. Part number 5513655; offered as a used, untested unit.

Patient positioning strap with a side-release buckle and a three-prong side-release buckle, used to secure and position patients. A used, untested ...

Patient positioning strap with a side-release buckle and a receptacle for a three-prong side-release connector, intended to secure and adjust patie...

Connector flap kit for magnetic resonance imaging, a set of connector flaps for installation on system connectors. A new OEM original unit from Sie...

Blanking flange for NW16 connections to close and seal the interface; Siemens part 08396249. A new OEM original unit, supplied sealed in its packag...

Prevention blind for carrier plates used in magnetic resonance imaging equipment, manufactured by Siemens (part number 10092310). A new OEM origina...

An update package for Siemens imaging equipment, supplied as a software service pack. Part number 10591760; a new OEM unit delivered in sealed orig...

Graphite rupture disk serving as a pressure-relief device, manufactured by BS&B Safety Systems, part number 10129361. Offered as a new unit.

A graphite burst disc rated 26 psi with a 65 mm nominal bore, functioning as a pressure-relief safety device for MR applications. Supplied as a new...

Management module for HP UPS systems providing a communication and control interface. A new OEM original unit (part number AF401A), supplied in fac...

Pressure-rupture safety device for EHG3 monobloc MRI units, manufactured by ELFAB (G365G20ES80A). A new OEM original unit, supplied in original sea...

Bursting disc monobloc for MRI applications, acting as a pressure-relief rupture device. New OEM original from ELFAB, part number 10099869, supplie...

Graphite burst disc rated 26psi with a 65mm NB nominal diameter, for pressure relief in magnetic resonance (MR) magnet assemblies. Manufactured by ...

Graphite burst disc rated to rupture at 26 psi with a 65 mm nominal bore, serving as an overpressure relief element for Magnetic Resonance imaging ...

Graphite burst disc rated 26psi with 65 mm nominal bore, functioning as a pressure-relief element and listed as compatible with MR magnet assemblie...

A graphite burst disc for MRI magnet assemblies, 90MM NB and rated 20 PSI, serving as a pressure-relief element. Siemens part 10121915; a new unit.

Filter kit spare for magnetic resonance imaging (MRI) equipment, manufactured by Siemens; part number 04763673. A new OEM unit supplied in sealed o...

Spare component for X‑ray equipment manufactured by Siemens; part number 2125284. Offered as a used, untested unit.